1. We started off by setting up a patch on the Volca Keys. The 'Unison Ring' setting allows the use of three detuned square wave oscillators, which adds some movement. A short attack, medium decay and full sustain helped create a 'gated' effect. The filter was left open with some resonance to boost the high frequencies. We then played notes until we found a discordant interval:
2. Next it was time to add interest to the loop, and create some futuristic sounds. We started up the Mini KP2 and went over to the 'loop' section of effects and set the tempo to maximum. First experimenting with the 'Pitch Looper', we were able to loop and pitch the Volca Keys sound. Holding a finger on the X-Y pad then resulted in repeated waveform cycles akin to computer processing sounds:
3. This is where the hands-on magic of hardware comes into use, small swipes across the XY pad add movement to the effect:
4. Even more interest can be added through exploring different directions of swiping:
5. Cycling through other effects on the Mini KP2 garnered instantly usable alarm sounds:
6. While stopping the Volca sequencer and processing it's amplifier noise with the Decimator setting on the Mini KP2 created some harsh digital malfunction effects:
Even the most minimal hardware setups can offer a different type of control than software, which for creating huge variations of effects, can be much faster. The results of 'playing' the effects with knobs, controllers and X-Y pads add to the experience. We thought it would useful to share the results of our audio exploration here:
344 Audio is an Audio Post Production Company in Manchester.
If you enjoyed this post, discover our Ultimate Guide to Audio Post-Production.
Curious to hear our work? Listen to our portfolio.
Keen to learn more about Foley? Explore our Creative Foley Workshop.
Eager to learn more about Audio Post and Sound Design? Explore our Audio Post Essentials Course.
We also have Pro Tools templates and sound effects available for purchase.
